Yealink T54S

Call Features
297
“dialplan.emergency.asserted_id_source” is not set to HELD.
Permitted
Values
a combination of digits 1, 2 and 3
Default
1, 2, 3
Parameter
dialplan.emergency.held.server_url
<y0000000000xx>.cfg
Description
It configures the Location Information Server URL for the IP phone to send HELD
location request.
Note: It works only if “dialplan.emergency.enable” is set to 1 (Enabled) and
“dialplan.emergency.asserted_id_source” is set to HELD.
Permitted
Values
String
Default
Blank
Parameter
dialplan.emergency.held.request_type
<y0000000000xx>.cfg
Description
It configures the type of the location request message.
Note: It works only if “dialplan.emergency.enable” is set to 1 (Enabled) and
“dialplan.emergency.asserted_id_source” is set to HELD.
Permitted
Values
SIMPLE or REDSKY
If it is set to SIMPLE, the IP phone will send the location request message defined in
RFC5985.
If it is set to REDSKY, the IP phone will send the location request message defined by
REDSKY.
Default
SIMPLE
Parameter
dialplan.emergency.held.request_element.X.name
[1]
<y0000000000xx>.cfg
Description
It configures the custom element name to be sent in a location request message.
For example:
dialplan.emergency.held.request_element.1.name = mac
dialplan.emergency.held.request_element.2.name = companyID
dialplan.emergency.held.request_element.3.name = nai
Note: It works only if “dialplan.emergency.enable” is set to 1 (Enabled) and
“dialplan.emergency.asserted_id_source” is set to HELD.
Permitted
Values
String
Default
Blank
Parameter
dialplan.emergency.held.request_element.X.value
[2]
<y0000000000xx>.cfg
Description
It configures the custom element value to be sent in a location request message.