Troubleshooting
544
Applications->Broadsoft XSI->Network Directory->Personal (if bw.enable =1)
directory.update_time_interval
It configures the interval (in minutes) for the IP phone to update the data of the
BroadSoft directory from the BroadSoft server.
Note: It works only if “bw.xsi.directory.enable” and “bw.xsi.directory.update.enable”
are set to 1 (Enabled).
bw.xsi.directory.update.enable
It enables or disables the IP phone to automatically download all contacts in the
BroadSoft Directory from server.
Note: It works only if “bw.xsi.directory.enable” is set to 1 (Enabled).
0-Disabled, the IP phone downloads partial contacts from server (the maximum of
contacts available for viewing at one time is determined by server), and you can
manually download the remaining contacts as needed
1-Enabled
bw_phonebook.group_common_displayname
It configures the display name on the LCD screen for the group common directory.
Note: It works only if the values of the parameters "bw.xsi.enable",
"bw.xsi.directory.enable" and "bw_phonebook.group_common_enable" are set to 1
(Enabled) and XSI is configured for account 1.
String within 99 characters
Applications->Broadsoft XSI->Network Directory->Group Common (if bw.enable =1)
bw.xsi.directory.alphabetized_by_lastname.enable
It configures the call ID (first name and last name) display method when the phone
receives an incoming call, places an outgoing call or is during an active call.
0-First name Last name
1-Last name, First name
To Next Page
Loading...
