Yealink T54S

Troubleshooting
547
Parameter
account.X.shared_line_one_touch_bargein.enable
[1]
<MAC>.cfg
Description
It enables or disables the IP phone to barge in the call between remote shared line
party and the third party by pressing the line key.
Note: It is not applicable to T19(P) E2 IP phones
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
account.X.shared_line_one_touch_retrieve.enable
[1]
<MAC>.cfg
Description
It enables or disables the IP phone to retrieve the public held call on remote shared
line party phone by pressing the line key.
Note: It is not applicable to T19(P) E2 IP phones.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Parameter
features.auto_release_bla_line
<y0000000000xx>.cfg
Description
It enables or disables the server to release the connection by sending a notify
message to IP phone when the call is end.
Permitted
Values
0-Disabled, the IP phone will send a notify message to server to release the
connection.
1-Enabled
Default
0
Parameter
account.X.sca_manage_interface_display_time
[1]
<MAC>.cfg
Description
It configures how long (in seconds) will the IP phone exit the Shared Calls screen.
Example:
account.1.sca_manage_interface_display_time=10
If the user does not perform any operation for 10 seconds on Shared Calls screen, the
IP phone will exit the screen.
Note: You can enter the Shared Calls screen by long pressing the shared line key when
there is a call on the remote shared line party. It is not applicable to T19(P) E2 IP
phones.
Permitted
Values
Integer from 0 to 2147483647
Default
10
[1]
X is the account ID. For T54S/T48S/T48G/T46S/T46G/T29G, X=1-16; for T52S/T42G/T42S, X=1-12; for
T41P/T41S/T27P/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21(P) E2, X=1-2; for T19(P) E2, X=1.