Phone Network
51
Example:
static.managementserver.connection_request_username = accuser
String within 128 characters
Settings->TR069->Connection Request Username
static.managementserver.connection_request_password
It configures the password for the IP phone to authenticate the incoming connection
requests.
Example:
static.managementserver.connection_request_password = acspwd
String within 64 characters
Settings->TR069->Connection Request Password
static.managementserver.periodic_inform_enable
It enables or disables the IP phone to periodically report its configuration information
to the ACS (Auto Configuration Servers).
Settings->TR069->Enable Periodic Inform
static.managementserver.periodic_inform_interval
It configures the interval (in seconds) at which the IP phone reports its configuration
to the ACS (Auto Configuration Servers).
Note: It works only if “static.managementserver.periodic_inform_enable” is set to 1
(Enabled).
Integer from 5 to 4294967295
Settings->TR069->Periodic Inform Interval (seconds)
To Next Page
Loading...
