Yealink T54S

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
68
Web Server Type Configuration
Yealink IP phones support both HTTP and HTTPS protocols for accessing the web user interface. You can
configure the web server type. Web server type determines access protocol of the web user interface. If
you disable to access web user interface using the HTTP/HTTPS protocol, both you and the user cannot
access the web user interface.
The following table lists the parameters you can use to configure web server type.
Parameter
static.wui.http_enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables the user to access the web user interface of the IP phone using
the HTTP protocol.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Network->Advanced->Web Server->HTTP
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin) ->Network->Web Server->HTTP Status
T42G/T42S/T41P/T41S/T40P/T40G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Settings->Advanced Settings (default password: admin) ->Network->Web
Server->HTTP Status
Parameter
static.network.port.http
[1]
<y0000000000xx>.cfg
Description
It configures the HTTP port for the user to access the web user interface of the IP
phone using the HTTP protocol.
Permitted
Values
Integer from 1 to 65535
Default
80
Web UI
Network->Advanced->Web Server->HTTP Port (1~65535)
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin) ->Network->Web Server->HTTP Port
T42G/T42S/T41P/T41S/T40P/T40G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Settings->Advanced Settings (default password: admin) ->Network->Web
Server->HTTP Port
Parameter
static.wui.https_enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables the user to access the web user interface of the IP phone using
the HTTPS protocol.
Permitted
0-Disabled