Yealink W52P

24
Other
Lock a Handset
To lock the keypad via the handset:
Press and hold when the handset is idle until the screen shows “Keypad
Locked. Press and hold # to unlock!”
The locked icon will appear on the screen. You can still answer or reject
incoming calls as usual. You can also end the answered call by pressing .
To unlock the keypad via the handset:
Press and hold when the handset is idle until the screen shows “Keypad
Unlocked.”
Page a Handset
If you can’t remember where you left a handset, you can page it to make it easier
to find.
To locate a handset:
Press on the base station.
All handsets registered to this base station will ring simultaneously (paging) and
display the IP address of the base station on the screen.
Press any key on the handset or press again to end paging.
Silent Mode
If you don’t want to be disturbed, you can switch on silent mode. Incoming call
information will still show on the screen when receiving an incoming call, but the
handset will not ring.
To turn on silent mode via the handset:
Press and hold the star button until the screen shows “All Ring Tones O.”
To turn o silent mode via the handset:
Press and hold the star button again until the screen shows “All Ring Tones On.”