EasyManua.ls Logo

Yealink W52P - Notification Light

Yealink W52P
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
Do Not Disturb (DND)
You can activate or deactivate Do Not Disturb on a per-line basis. When DND
is activated, all incoming calls to that line will be rejected automatically and the
callers will hear a busy tone.
To activate or deactivate:
1. Press OK to enter the main menu.
2. Select Call Features >> Do Not Disturb.
3. Select the desired line using the up or down navigation buttons, and then
press OK.
4. Press the right or left navigation buttons to enable or disable DND from the
Status field.
5. Press OK to accept the change.
Notification Light
When the handset receives a voicemail or misses a call, the message key LED
flashes red.
To enable or disable the notification light:
1. Press OK to enter the main menu.
2. Select the Settings button >> Display >> Notification Light.
3. Press the left or right navigation buttons to select Enabled or Disabled in the
voicemails field.
4. Press the left or right navigation buttons to select Enabled or Disabled in the
missed calls field.
5. Press Save to accept the change or Back to cancel.

Other manuals for Yealink W52P

Related product manuals