3
Equipment
Base Station
Set up the base station and the charger cradle at a central location on a flat,
non-slip surface. The phone coverage is up to 50 meters inside buildings, and up
to 300 meters in unobstructed outdoor areas.
You have two options for power and network connection of the base station: AC
power and Power over Ethernet (PoE).
To connect the AC power:
• Connect the DC plug on the power adapter to the DC5V port on the base
station and connect the other end of the power adapter into an electrical
power outlet.
• Connect the supplied Ethernet cable between the Internet port on the base
station and the Internet port in your network or the switch/hub device port.
To connect the PoE:
• Connect the Ethernet cable between the Internet port on the base station
and an available port on the in-line power switch/hub.
After the base station starts up successfully, all LEDs on the base station
illuminate green in sequence.
To Next Page
Loading...
