4
Base Station Description
After the base station starts up successfully and the handset is registered to the
base station, all LEDs on the base station illuminate green in sequence.
Hardware component instructions of the W52P base station are:
Item Description
1 Paging key
• Locates a misplaced handset
• Toggles the registration mode
• Resets the base station
to factory settings
2 Registration LED
Indicates the mode of the base station:
• Fast flashes green when the base
station is in the paging mode
• Slow flashes green when the base
station is in the registration mode
• Illuminates solid green when
there is at least one handset
registered to the base station
3 Network Status LED
Indicates the network status:
• Slow flashes green when the
network is unavailable
• Illuminates solid green when
the network is available
To Next Page
Loading...
