| Call Features | 39
Call Features
You can use the phone to place and answer calls, ignore incoming calls, transfer a call to someone else,
conduct a conference call and perform other basic call features.
• Changing the Default Outgoing Line
• Placing Calls
• Answering Calls
• Disabling Call Waiting
• Switching Among the Receiver, Handsfree and Headset Modes
• Silencing or Rejecting Incoming Calls
• Ending Calls
• Muting/Unmuting Audio
• Holding and Resuming Calls
• Call Forward
• Transferring Calls
• Conference Calls
• Recording Using an SD Card
• Multicast Paging
Changing the Default Outgoing Line
Only the outgoing line(s) assigned by your system administrator can be used to place calls. When multiple
outgoing lines are assigned to the handset, the first one will be the default outgoing line. You can change
the default outgoing line of the handset.
About this task
It is only applicable to W73H/W78H/W56H/W53H/W59R.
Procedure
1. Go to OK > Settings > Telephony > Default Line.
The phone displays all the assigned outgoing lines. The default outgoing line is highlighted and followed by a left
arrow.
2. Highlight the desired line, and then press OK.
The default outgoing line is changed successfully.
Placing Calls
After the handset is registered to the base station successfully, you can use your handset to place an
internal or external call.
The handset can keep 2 (for CP930W/CP935W is 4) calls at one time at almost, one (associated with the
audio) active and the other one on hold.
• Placing Internal Calls
• Placing External Calls
• Placing a Call from the Call History
• Placing a Call from the Directory
To Next Page
Loading...
