Yealink W70B

| Advanced Call Features | 65
Before you begin
There is at least one call placed on public hold on the shared line.
Procedure
Select Resume.
Barging in an Active Call on a Shared Line
In the SCA scenario, you can barge into an active call on the shared line. After you barge into a call, the
call turns into a three-party conference.
Before you begin
There is at least one active call on the shared line. Only one user can barge into an active call on the
shared line at a time.
About this task
It is not applicable to CP930W/CP935W.
Procedure
1. Select SCA and then select an active call.
2. Select BargeIn (Barge In) to interrupt the active call.
Pulling a Shared Call on a Shared Line
In the SCA scenario, both you and other users can pull an existing call from another shared phone that is
active or held.
Before you begin
There is an active or held call on the shared line. Contact your system administrator for the call pull feature
access code.
It is not applicable to CP930W/CP935W.
Procedure
1. Enter the call pull feature access code (for example, *11).
2. Press the OK key to dial out.
Voice Mail
Voice Mail feature allows you to leave voice mails for someone or listen to your voice mail messages on
your IP phones. This feature is set up on the server-side and not all servers support this feature.
• Setting the Voice Mail Code
• Setting a Voice Mail Key for a Specific Line
• Leaving Voice Mails
• Listening to Voice Mails
Setting the Voice Mail Code
If you want to connect to the message center, you need to set the voice mail code on your phone.