Yealink W70B

| Advanced Call Features | 66
Procedure
1. Go to OK > Voice Mail > Set Voice Mail.
On the W73H/W78H, go to OK > Voice Mail > Status, select On from the Status field, and select Set
Number.
On the CP930W, go to Menu > Message > Set Voice Mail Code.
On the CP935W, go to More > Message > Set Voice Mail Code.
On the DD phone, go to Menu > Message > Voice Mail > Set Voice Mail Code.
2. Select the desired line, and then press Select.
3. On the W56H/W53H/W59R, select Enabled from the Status field.
4. Enter the voice mail code.
5. Confirm the action.
Setting a Voice Mail Key for a Specific Line
You can set digit key 1 as a voice mail key for a specific line. When the handset is idle, you can long press
this key, and quickly access the voice mails without scrolling through the menu.
About this task
Note: It is only applicable to W73H/W78H/W56H/W53H/W59R.
Procedure
1. Go to OK > Voice Mail > Set Key 1.
2. Select the desired line, and then press Select.
Leaving Voice Mails
You can leave a voice mail to someone who is busy or inconvenient to answer the call.
Procedure
1. Follow the voice prompts to leave a voice mail.
2. Hang up to complete the voice mail.
Listening to Voice Mails
You can listen to your voice mails on the handset directly.
Before you begin
You need to set the voice mail code in advance.
Procedure
1. Go to OK > Voice Mail > Play Message or press the Message key.
On the CP930W, go to Menu > Message > Play Message.
On the CP935W, go to More > Message > View Voice Mail.
On the DD phone, go to Menu > Message > Voice Mail > View Voice Mail.
2. Select the desired line, and then press Select.
The handset dials out the voice mail code using the selected line automatically.