| Call Features | 42
3. Highlight a contact and press the Off-hook or Send key.
On the CP935W, select the desired contact directly to dial out.
Placing a Call from the Directory
You can place a call to a contact directly from your directory.
Procedure
1. Go to OK > Directory.
On the CP930W/DD phone/CP935W, select Directory or Menu > Directory.
2. Select the desired directory.
3. Highlight the desired contact and press the Off-hook key or Send.
On the CP935W, select the desired contact and tap .
If the selected contact has multiple numbers, highlight the desired number, and select OK.
Placing a Call from the Shared Directory
You can place a call to a contact directly from your shared directory.
About this task
It is not applicable to DD phones.
Procedure
1. Go to OK > Directory > Shared Directory.
On the CP930W/CP935W, select Directory or Menu > Directory.
2.
Highlight the desired contact and press .
On the CP935W, select the desired contact and tap .
If the selected contact has multiple numbers, highlight the desired number, and select OK.
Speed Dial on the W73H/W78H/W56H/W53H/W59R
You can quickly dial a number by using a speed dial key without entering the directory.
• Assigning a Speed Dial Number
• Changing a Speed Dial Number
• Deleting a Speed Dial Number
• Calling a Contact Using a Speed Dial Key
Assigning a Speed Dial Number
You can assign a contact number as a speed dial number to the digit key. A maximum of 8 speed dial
numbers are allowed.
Before you begin
The assigned number should exist in the directory.
To Next Page
Loading...
