NeoGate TA410/810 User Manual
14/51
Figure III-3-3 PPPoE
Fill in user name and password to access the Internet via PPPoE.
3.1.2 Service
The administrator can manage all the access methods on NeoGate TA on the "Service"
page.
Figure III-3-4 Service Settings
Table III-3-2 Description of Service Settings
SSH
By using SSH, you can log in to NeoGate and run commands. It's
disabled by default. We don't recommend enabling it if not needed.
The default port for SSH is 8022;
FTP
FTP access;
TFTP
The default port is 23.
HTTP
HTTP web access;
The default port is 80.
HTTPS
HTTPS web access, it is disabled by default, and you can enable it
3.1.3 VLAN Settings
A VLAN (Virtual LAN) is a logical local area network (or LAN) that extends beyond a single
traditional LAN to a group of LAN segments, given specific configurations.
To Next Page
Loading...
Need help?
General
