NeoGate TA410/810 User Manual
17/51
dynamically. You must sign up for service through dyndns.org, freedns.afraid.org,
www.no-ip.com, www.zoneedit.com.
3.1.6 Static Route
NeoGate TA will have more than one Internet connection in some situations but it has only
one default gateway. You will need to set some Static Route for NeoGate TA to force it to
go out through different gateway when accessing to different internet.
The default gateway priority of NeoGate TA from high to low is VPN/VLANLAN port.
Figure III-3-8 Static Route
1) Route Table
The current route rules of NeoGate TA.
2) Static Route Rules
You can add new static route rules here.
Table III-3-5 Description of Static Route Settings
The destination network to be accessed to by NeoGate TA.
Specify the destination network portion.
Gateway
Define which gateway NeoGate TA will go through when accessing
the destination network.
Metric
The cost of a route is calculated by using what are called routing
metric. Routing metrics are assigned to routes by routing protocols
to provide measurable statistic which can be used to judge how
useful (how low cost) a route is.
Define which internet port to go through.
To Next Page
Loading...
Need help?
General
