NeoGate TA410/810 User Manual
20/51
3.2.2 Alert settings
If the device is under attack, the system will alert users via call or E-mail.
The attack modes include IP attack and Web Login.
Figure III-3-13 Alert Settings
1. IPATTACK
When the system is attacked by IP address, the firewall will add the IP to auto IP Blacklist
and notify the user if it matches the protection rule.
1) Phone Notification Settings
Table III-3-6 Description ofPhone Notification Settings
Whether to enable phone notification or not.
Number
The numbers could be set for alert notification; users can setup
multiple extension and outbound phone numbers. Please
separate them by “;”.
Example: “500;9911”, if the extension has configured Follow Me
Settings, the call would go to the forwarded number directly.
Attempts The attempts to dial a phone number when there is no answer.
Interval
The interval between each attempt to dial the phone number.
Must be longerthan 3 seconds, the default value is 60 seconds.
Users will hear the prompt while receiving the phone notification.
2) E-mail Notification Settings
Note: Please ensure that all voicemail settings are properly configured on the System
Settings -> Voicemail Settings page before using this feature.
Table III-3-7 Description ofE-mail Notification Settings
E-mail Notification Whether to enable E-mail Notification or not.
Recipient’s Name
The recipients for the alert notification, and multiple email addresses
are allowed, please separate them by “;”.
E.g. jerry@yeastar.com;jason@yeastar.com;456@sina.com
Subject The subject of the alert email.
Email Content
Text content supports predefined variables. Variable names and
corresponding instructions are as follows:
To Next Page
Loading...
Need help?
General
