NeoGate TA410/810 User Manual
42/51
Template ID The ID for this template.
Template Name A name for this template.
Dial Pattern
Calls from the FXO port should match the dial pattern set on this
template, or the call cannot be established.Hover the pointer over
to read tips.
Strip
Allows the user to specify the number of digits that will be stripped
from the front of the phone number before the call is placed.
Prepend
The digits will be appended to the phone number before the call is
placed.
DTMF Mode
Set default mode for sending DTMF of this trunk.Default setting:
rfc2833.
Codec Define the codec for this sip trunk and its priority.
4.2.3 SIP Settings
This is the SIP settings in NeoGate, including General settings, NAT, Codecs, QoS,
Response Code, T.38, and advanced settings.
1) General
Figure III-4-11 SIP General Settings
To Next Page
Loading...
