NeoGate TA410/810 User Manual
23/51
Figure III-3-16 AMI Settings
Username & password: after enabling AMI, you can use this username and password to
log in NeoGate TA AMI.
Permitted "IP address/Subnet mask": you can set which IP can log in NeoGate TA AMI
interface.
3.2.4Certificates
NeoGate TA can support TLS trunk. Before you register TLS trunk to NeoGate TA, you
should upload certificates first.
Figure III-3-17 Certificates
Trusted Certificate
This certificate is a CA certificate. When selecting “TLS Verify Client” as “Yes”, you should
upload a CA. The relevant IPPBX should also have this certificate.
Gateway Certificate
This certificate is server certificate. No matter selecting “TLS Verify Client” as “Yes”
or “NO”, you should upload this certificate to NeoGate TA. If IPPBX enables “TLS Verify
To Next Page
Loading...
Need help?
General
