Yeastar Technology TG Series - IAX Settings

NeoGate TA410/810 User Manual
47/51
Session-timers
Enable session-timer mode, default: yes. If you find
the call is cut off every 15 minutes every time, please
disable this.
Session-expires The max refresh interval
Session-minse
The min refresh interval, which mustn't be
shorterthan 90s.
Session-refresher Choose the session-refresher, the default is Uas.
4.2.4 IAX Settings
IAX is the Internal Asterisk Exchange protocol, you can connect to NeoGate TA or register
IAX trunk to another IAX server. It’s supported by the asterisk-based IPPBX.
Figure III-4-17 IAX Settings
Table III-4-11 Description of IAX Settings
Items
Description
Bind Port
Port used for IAX2 registrations. The default is 4569.
Bandwidth
Low/medium/high with this option you can control which codec
to be used.
Min Registration Time
Minimum duration (in seconds) of an IAX2 registration. Default
is 60 seconds
Max Registration Time
Maximum duration (in seconds) of an
IAX2 registration.
Default is 1200 seconds.
Codecs
Enable the codec you want for IAX communication.