NeoGate TA410/810 User Manual
46/51
busy, no response and others.
Figure III-4-15 Response Code
Note: We don’t’ recommend configuing this if you are not familiarwith the code of call
status from the VoIP server.
6) Advanced Settings
Figure III-4-16 SIP Advanced Settings
Table III-4-10 Description of SIP Advanced Settings
Where to get the caller ID in SIP packet.
Where to get the DID in SIP packet.
180 Ringing
It is set when the telecom provider needs. Usually it is
not needed.
Remote Party ID
Whether to send Remote-Party-ID on SIP header or
not. Default: no.
Allow Guest
Whether to allow anonymous registration extensionor
not. Default: no. It’s recommendedthat it is disabled
for security reason.
Enable pedantic parameter. Default: no.
Alwaysauthreject
If enabled, when NeoGate TA rejects “Register”
or “Invite” packets, NeoGate TA always respond the
packets using
recommended that it is enabled for security reason.
To Next Page
Loading...
Need help?
General
