NeoGate TA410/810 User Manual
48/51
4.3 Gateway Settings
4.3.1 General Preferences
Figure III-4-18 General Settings
Table III-4-12 Description of General Settings
Number of seconds to ring a device before giving up.
MAX Call Duration
The absolute maximum amount of time permitted for a
call. A setting of 0 disables the timeout.
Enable Jitterbuffer
Forces the use of a jitter buffer on the received side of a
SIP channel.
The call quality will be improved if this
option is enabled.
FXO Mode
Select country to set the On Hook Speed, Ringer
Impedance, Ringer Threshold, Current Limiting,TIP/RING
voltage adjustment, Minimum Operational Loop Current,
and AC Impedance as predefined for your country's
analog line characteristics. The default setting is "FCC".
4.5 Advanced Settings
4.5.1 Tone Zone Settings
Advanced ring tones for all the FXO ports can be configured on this page. There are
pre-grogrammed tone zone settings for some countries and regions. Users can simply
find and select thier country to get tone zone settings for the gateway.
To Next Page
Loading...
Need help?
General
