NeoGate TA410/810 User Manual
7/51
Configuration Guide
1. Login
The NeoGate TA attempts to contact a DHCP server in your network to obtain valid
network settings (e.g., the IP address, subnet mask, default gateway address and DNS
address) by default.
Please enable DHCP Server in your network to obtain the NeoGate IP address.
How to check NeoGate TA IP address:
1.
Download a DeviceFound tool from Yeastar website: FindTA.rar
2. Run the DeviceFound.exe software.
3. The detected NeoGate TA devices in the local network will appear in the window.
4. Find the TA device’s IP address by the device’s MAC address or the SN.
Figure III-1-1 Device Found Software
Logging On:
After entering the IP address in the Web browser, users will see a log-in screen.
Check the default settings below:
Username: admin
Password: password
To Next Page
Loading...
Need help?
General
