NeoGate TA410/810 User Manual
6/51
Connect NeoGate TA FXO Gateway and FXS Gateway
NeoGate TA FXO gateway can be connected to a FXS gateway using SPS/SPX Mode.
Imagine this, the FXO gateway is set up in Site A, and the FXS gateway in Site B. People
in Site B can make and receive calls using the local PSTN lines (which is connnected to
Site A’s provoider). With this solution, you can call a local number using a local PSTN line
wherever you are.
Figure II-2 Connect TA810 and FXS Gateway
To Next Page
Loading...
