YL9160 PDA Detector
Auto Zero : Automatically zero absorbance value.
Verification : Verify wavelength accuracy and dark current. Test result will be saved as a text file format in
a designated folder.
L9160
Fault Reset : Release Fault status when error happens.
D2 On/Off : Turn on/off D2 lamp.
W On/Off : Turn on/off Halogen-tungsten lamp.
Status : Display of YL9160 status. Ready, Initializing, Run or any errors
Sampling Rate : Display acquisition rate selected.
Bandwidth : Display bandwidth selected.
Response Time : Display filter response time of acquisition data.
Firmware : Display firmware version.
D2 Lamp Time : Display used time of D2 lamp.
D2 Lamp Status : Display whether D2 lamp is on or off.
11
To Next Page
Loading...