To Next Page

To Previous Page

10-2

IM 04P02B01-01E

Code Message Explanation/Countermeasures

72 MATH channel is turned off –

81 All space or ‘quit’ string cannot be specified. –

86 The key-lock release password is incorrect. Enter the correct password.

87 This key is locked. –

91 Password is incorrect. Enter the correct password.

100 IP address doesn’t belong to class A, B, or C. –

101 The result of the masked IP address is all 0s or 1s. –

102 SUBNET mask is incorrect. Set a correct subnet mask.

103 The net part of default gateway is not equal to Set the correct default gateway.

that of IP address.

151 This action is invalid during calculation. –

160 This action is invalid during chart end. –

161 This action is invalid during pen hold. –

162 Cannot set an number for a skipped data. –

163 This action is invalid during record. –

164 This action is invalid during manual printing. –

165 This action is invalid during list printing. –

166 This action is invalid during setup list printing. –

167 This action is invalid during chart feed. –

169 This action is invalid during ribbon hold. –

Operation Errors

Code Message Explanation/Countermeasures

232 There is no available data. There is no data for periodic printout or data for calculating TLOG

when the timer expired.

Communication Errors

Code Message Explanation/Countermeasures

300 Command is too long. –

301 Too many number of commands delimited with ’;’. Keep the number of commands separated by sub delimiters

under 10.

302 This command has not been defined. –

303 Data request command can not be enumerated with –

sub-delimiter.

350 Command is not permitted to the current user level. –

351 This command cannot be specified in the current –

mode.

352 The option is not installed. –

353 This command cannot be specified in the current –

setting.

354 This command is not available during calculation. –

390 Command error. –

391 Delimiter error. –

392 Parameter error. –

393 No permission. –

394 No such connection. –

395 Use “quit” to close this connection. Attempted to disconnect its own connection.

396 Failed to disconnect. –

397 No TCP control block. The control block of the specified connection cannot be found.

10.1 A List of Error Messages

Brand	YOKOGAWA
Model	436101
Category	Measuring Instruments
Language	English

YOKOGAWA 436101 User Manual

Table of Contents

Other manuals for YOKOGAWA 436101

Questions and Answers:

YOKOGAWA 436101 Specifications

Related product manuals