8-3
IM 04P02B01-01E
Setup Operations for Changing the Displayed Contents
8
8.2 Changing the Displayed Information
This section explains the details of registering display types to screens 01 to 15. As an
example, the procedure of setting 1-channel digital display is explained below.
Procedure
1-Channel Digital Display
1. Hold the
MENU
1
key for 3 seconds to show the data display setup screen.
2. Press the key or SHIFT + key to select the screen number and then
press the
key.
A sample screen of the display type appears. A section of the display blinks to
indicate that this is a data display setup screen.
3. Press the
or SHIFT + key to switch the display. Select the 1-channel
digital display and then press the key.
4. Press the key or SHIFT + key to select the channel switching interval
and then press the
key.
5. When the Setting complete screen appears, press the key.
Hold the
MENU
1
key down for 3 seconds to exit from the data display setup
screen.
Select the channel switching interval.
Select the display type.
Select the screen No.
Current display type name.
The new setting takes effect.
Screen 01
Setting complete
Screen number=01
Interval=Auto2s
01 200.0 mV
Explanation
Interval
Sets the channel switching interval.
Select the interval from 1 s, 2 s, 3 s, 4 s, 5 s, and manual.
1s, 2s, 3s, 4s, 5s: Switches the channels at the specified interval.
Manual: Switch the channel manually.
Assigning Other Display Types (See the menu on the previous page)
• When assigning the flag display, specify whether to display the flag for each channel.
• If the channel switching interval is set to manual when assigning the display in which
different screens can be assigned to the top and bottom sections, set the channel
number.
<Related Topics>
Display types: Section 12.4
To Next Page
Loading...
Need help?
General
