xiii
IM AQ6375E-02EN
Flow of Operation
The figure below is provided to familarize the first-time user with the general flow of this instrument
operation. For the details of each item, see the relevant section in IM AQ6375E-01EN or IM
AQ6375E-02EN.
Measurement Preparation
Setting Conditions and Measuring
Waveform Display
Installing the Instrument
Turning the Power On and Off
Alignment Adjustment
Wavelength Calibration
Purge
Connecting the DUT
Auto Sweep Setting and Measurement
Other Settings
Starting a Measurement (Sweep)
Displaying Waveforms
Displaying Calculated Waveforms
Displaying Power Spectral Density
Displaying Markers
Searching
Analyzing Waveforms
Waveform Analysis
Saving Waveforms
Storage Device
Saving Data
Section 3.1
Section 3.3
Section 3.4
Section 3.5
Section 3.6
Section 3.7
Section 3.2*
Sections 2.1* to 2.7*
Section 3.2*
Sections 4.1* to 4.4*
Section 4.5*
Section 4.8*
Section 5.1 to 5.4*
Sections 4.9*
Sections 6.1* to 6.10*
Section 7.1*
Sections 7.2* to 7.7*
To Next Page
Loading...
Need help?
General
