YOKOGAWA AQ6375E - 3.1 Installing the Instrument

Preparing for Measurement
3-1
IM AQ6375E-02EN
1
2
3
4
5
6
App
Index
Chapter 3 Preparing for Measurement
3.1 Installing the Instrument
WARNING
• This instrument is designed to be used indoors. Do not install or use it outdoors.
• Install the instrument so that you can immediately remove the power cord if an abnormal or
dangerous condition occurs.
CAUTION
Do Not Apply Shock to the Instrument
Non-horizontal orientation, and do not drop the instrument from a height of 2 cm or more. This
can adversely affect the accuracy of the internal monochromator and inhibit performance.
Take great care when transporting the instrument, and use packaging with a shock absorbing
capacity that is greater than or equal to the packaging used upon shipment from the factory.
Never use inferior packaging materials that are unable to sufficiently absorb vibrations and
shocks occurring during transport. This can adversely affect the accuracy of the internal
monochromator and inhibit performance.
When unpacking
When the instrument is packaged in a box and moved, prevent condensation by allowing
sufficient time for the instrument to acclimatize before removing it from the box.
French
AVERTISSEMENT
• L’instrument est prévu pour une utilisation en intérieur. Ne pas l’installer, ni l’utiliser à
l’extérieur.
• Installer l’instrument de manière à pourvoir immédiatement le débrancher du secteur en
cas de fonctionnement anormal ou dangereux.