3-10
IM AQ6375E-02EN
3.3 Turning the Power ON/OFF
2.
Turn ON the MAIN POWER switch on the rear panel of the instrument. The POWER switch
on the front panel of the instrument lights orange.
3.
Wait a few seconds after step 2, and then press the POWER switch on the front panel of the
instrument. The color of the switch turns from orange to green. The operating system starts
up, and initialization of the instrument begins. The instrument will not start for a few seconds
immediately after step 2 even if you press the POWER switch.
The initialization screen appears, and the internal initialization process starts. STEP 1/9 through
STEP 9/9 are displayed in the lower right part of the screen to indicate the progress of initialization.
CAUTION
Do not press the POWER or MAIN POWER switches while initialization is in progress. Doing
so can cause malfunction.
French
ATTENTION
N’appuyez pas sur les interrupteurs POWER ou MAIN POWER pendant l’initialisation. Cela
pourrait provoquer des dysfonctionnements.
To Next Page
Loading...
Need help?
General
