5-5
IM AQ6375E-02EN
Maintenance
5
Reading the Firmware from a PC
1.
Press SYSTEM. A SYSTEM menu appears.
2.
Tap the More repeatedly until the More 4/4 menu is displayed.
3.
Tap the System Information. The firmware version is displayed.
4.
Tap the Update(NETWORK). The “Insert Update Files (NETWORK)” message appears.
5.
Connect the PC containing the update firmware to the AQ6375E over a network.
You need to enter a user name and password when establishing a connection.
User name: user
Password: yokogawa
6.
Use a file management software on the PC to copy the update software (.upd extension) to
the UPDATE directory of the AQ6375E internal memory.
7.
For the remaining of the procedure, follow the steps from step 6 in “Reading the Firmware
from a USB Memory Device.”
Note
When you update the firmware, the setup data will be initialized.
If necessary, save the setup data. For the operating procedure, see section 7.4 in IM AQ6375E-01EN .
5.3 Updating the Firmware
To Next Page
Loading...
