12-9
IM 701510-01E
Saving and Loading Data from a Flopply Disk
12
12.4 Saving and Loading Setting Parameters
1. Press the SHIFT + STORE/RECALL (FILE) key to display the data
save/load menu. “Media” menu is also provided with DL1520L with
suffix code -C4. Press the “Media” soft key to display the media
selection menu, then select “Floppy”.
Turning ON/OFF the auto naming function
2. Press the “AutoFile” soft key to select “ON” or “OFF”. For more
details concerning this function, refer to the explanation later on.
Saving setting parameters
3. Press the “SETUP...” soft key to display the save/load setting menu
and a list of files.
4. Press the “SAVE” soft key to display the saving menu.
5. Press the “FileName” soft key to display the keyboard.
6. Use the keyboard to enter the filename. For details regarding the usage
of the keyboard, refer to page 4-8.
7. Press the “EXEC” soft key to start saving.
Loading setting parameters
3. Press the “SETUP...” soft key to display the save/load setting menu
and a list of files.
4. Press the “LOAD” soft key to display the loading menu.
5. Use the rotary knob to select the file to be loaded.
6. Press the “EXEC” soft key to start loading.
Keys and Procedure
Rotary knob
Soft keys
STORE/RECALL(FILE) key
SHIFT key
To Next Page
Loading...
Need help?
General
