YOKOGAWA DL350 Getting Started Guide

vii
IM DL350-03EN
Optional Accessories (Sold separately)
The optional accessories below are available for purchase separately. For information about ordering
accessories, contact your nearest YOKOGAWA dealer.
• Use the accessories specified in this manual. Moreover, use the accessories of this product only
with Yokogawa products that specify them as accessories.
• Use the accessories of this product within the rated range of each accessory. When using several
accessories together, use them within the specification range of the accessory with the lowest
rating.
Item Model Maximum Rated
Voltage to Ground
Note Manual No.
10:1 safety probe 700929 1000 Vrms CAT II 10:1 safety probe for the 720211,
720250, 720254, and 720281
IM 700929-01E
100:1 safety probe 701947 1000 Vrms CAT II 100:1 safety probe for the 720211,
720250, and 720254
IM 701947-01E
10:1 safety probe
(wide temperature
range type)
702902 1000 V (DC+ACpeak)
CAT II
10:1 safety probe, wide temperature
range, for isolated BNC input, for the
720211, 720250, and 720254
IM 702902-01EN
10:1 passive probe 701940 – 10:1 passive probe, for the 701275 IM 701940-01E
Current probe 701930 – 150 Arms, DC to 10 MHz. Used by
connecting to a probe power supply
(701934; sold separately).
IM 701930-01E
701931 – 500 Arms, DC to 2 MHz. Used by
connecting to a probe power supply
(701934; sold separately).
IM 701931-01E
701932 – 30 Arms, DC to 100 MHz. Used by
connecting to a probe power supply
(701934; sold separately).
IM 701932-01E
701933 – 30 Arms, DC to 50 MHz. Used by
connecting to a probe power supply
(701934; sold separately).
IM 701933-01E
701917 – 5 Arms, DC to 50 MHz. Used by
connecting to a probe power supply
(701934; sold separately).
IM 701917-01EN
701918 – 5 Arms, DC to 120 MHz. Used by
connecting to a probe power supply
(701934; sold separately).
IM 701917-01EN
Clamp-on probe 720930 300 Vrms CAT III
150 Vrms CAT IV
10mV/A
AC, 0 to 50 Arms
IM 720930-01EN
720931 600 Vrms CAT III
300 Vrms CAT IV
2.5mV/A
AC, 0 to 200 Arms (300 Apeak)
IM 720930-01EN
1:1 BNC safety
adapter lead
701901 1000 Vrms CAT II For use with the 720211, 720250,
and 720254. Used with the following
items (which are sold separately):
the 701954, B9852MM, B9852MN,
758922, 758929, or 758921.
–
1:1 safety adapter lead 701904 1000 Vrms CAT II
600 Vrms CAT II
For use with the 720268. Used with
the following items (which are sold
separately): the 701954, B9852MM,
B9852MN, 758922, 758929, or
758921.
–
Measurement lead 758933 1000 Vrms CAT III 1 m in length; for use with the
720268. Used with the following
items (which are sold separately):
the 701954, B9852MM, B9852MN,
758922, 758929, or 758921.
–
Alligator clip
(dolphin type)
701954 1000 Vrms CAT III Two pieces in one set (red/black) –
Safety miniclip
(hook type)
B9852MM 1000 Vrms CATIII Black –
B9852MN 1000 Vrms CATIII Red –
Alligator clip adapter 758922 300 Vrms CAT II Two pieces in one set –
758929 1000 Vrms CAT II Two pieces in one set –
Checking the Contents of the Package

YOKOGAWA DL350 Specifications

General

Brand	YOKOGAWA
Model	DL350
Category	Recording Equipment
Language	English