22-6
IM DLM3054-01EN
System Configuration (System Configuration)
You can specify the following settings.
• Date and time on the instrument
• Language (menu, message, USB keyboard)
• Measurement display (font size, number of rows outside the waveform area)
• Internal storage format
• Backlight adjustment (auto off, brightness)
• Offset cancel
• Delay cancel
• Trigger output
• USB communication feature
• Click sound on/off
Date and Time (Date/Time)
The instrument date and time.
Turning the Display On and Off (Display)
Sets whether or not to display the date and time on the instrument screen.
Display Format (Format)
Select the display format from one of the following options.
• Year/month (number)/day
• Day/month (number)/year
• Day-month (English abbreviation)-year (last two digits)
• Day month (English abbreviation) year
Date and Time (Date/Time)
Sets the date and time.
Time Difference from Greenwich Mean Time (Time Diff. GMT)
Set the time difference between the region where you are using the instrument and Greenwich Mean Time.
Selectable range: Set the time difference in the range of −12 hours 00 minutes to 13 hours 00 minutes.
For example, Japan standard time is ahead of GMT by 9 hours. In this case, set Time Hour to 9 and Minute to
00.
Checking the Standard Time
Using one of the methods below, check the standard time of the region where you are using the instrument.
• Check the Date, Time, Language, and Regional Options on your PC.
• Check the website at the following URL: http://www.worldtimeserver.com/
• This instrument does not support Daylight Saving Time. To set the time to Daylight Saving Time, reset the
time difference from Greenwich Mean Time.
• Date and time settings are backed up using an internal lithium battery. They are retained even if the power
is turned off.
• This instrument has leap-year information.
22 Other Features
To Next Page
Loading...
Need help?
General
