EasyManua.ls Logo

YOKOGAWA EJX530A - Page 60

YOKOGAWA EJX530A
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
<9.GeneralSpecications>
9-9
IM 01C25F01-01E
Item Description Code
MarineCerticate American Bureau of Shipping Type Approval
*3*5
WCA
Bureau Veritas Type Approval
*3*5
WCB
Det Norske Veritas Type Approval
*3*5
WCD
Lloyd’s Register of Shipping Type Approval
*3*4*5
WCL
Nippon Kaiji Kyokai (NK) Type Approval
*3*5
WCN
High Accuracy type
*22
High accuracy HAC
Painting Color change Ampliercoveronly
P
Ampliercoverandterminalcover,Munsell7.5R4/14 PR
Coating change Anti-corrosion coating
*6
X2
316 SST exterior parts
*7
316 SST name plate, tag plate and zero adjustment screw HC
Fluoro-rubber O-ring AllO-ringsofamplierhousing.Lowerlimitofambienttemperature:15°C (5°F) HE
Lightning protector Transmitter power supply voltage:
10.5 to 32 V DC (10.5 to 30 V DC for intrinsically safe type, 9 to 32 V DC for
Fieldbus communication type.)
Allowablecurrent:Max.6000A(1×40μs),Repeating1000A(1×40μs) 100 times
Applicable Standards: IEC 61000-4-4, IEC 61000-4-5
A
Status output
*8
Transistor output (sink type)
Contact rating: 10.5 to 30 VDC, 120 mA DC(max) Low level: 0 to 2 VDC
AL
Oil-prohibited use Degrease cleansing treatment. K1
Degreasecleansingtreatmentwithuorinatedoillledcapsule.
Operating temperature 20 to 80°C( –4 to 176°F)
K2
Oil-prohibited use with
dehydrating treatment
Degrease cleansing and dehydrating treatment K5
Degreasecleansinganddehydratingtreatmentwithuorinatedoilledcapsule.
Operating temperature. 20 to 80°C( –4 to 176°F)
K6
Capsulelluid Fluorinatedoillledincapsule
Operating temperature 20 to 80°C( –4 to 176°F)
K3
Calibration units
*9
P calibration (psi unit)
(See Table for Span and
Range Limits.)
D1
bar calibration (bar unit) D3
M calibration (kgf/cm
2
unit) D4
Output limits and failure
operation
*10
Failure alarm down-scale: Output status at CPU failure and hardware error is
–5%, 3.2 mA DC or less.
*24
C1
NAMUR NE43 Compliant
Output signal limits:
3.8 mA to 20.5 mA
*25
Failure alarm down-scale: Output status at CPU
failure and hardware error is –5%, 3.2 mA DC or less.
C2
Failure alarm up-scale: Output status at CPU
failure and hardware error is 110%, 21.6 mA or more.
C3
Gold-plated diaphragm
*18
Surface of isolating diaphragm is gold plated, effective for hydrogen permeation. A1
Wired tag plate 304 SST tag plate wired onto transmitter N4
Datacongurationat
factory
*11
DatacongurationforHART
communication type
Software damping, Descriptor, Message
CA
DatacongurationforBRAIN
communication type
Software damping
CB
Advanced diagnostics
*19
Multi-sensing process monitoring
• Impulse line blockage detection
*20
• Heat trace monitoring
DG6
European Pressure
Equipment Directive
*21
PED 97/23/EC
Category: III, Module: H, Type of Equipment; Pressure Accessory-Vessel,
Type of Fluid; Liquid and gas, Group of Fluid: 1 and 2
PE3
MaterialCerticate
*12
Process connector M15
Pressure test/
Leaktestcerticate
Test Pressure: 200 kPa (2 kgf/cm
2
)
*13
Nitrogen(N
2
) Gas or Water
*17
Retention time: one minute
T05
Test Pressure: 2 MPa (20 kgf/cm
2
)
*14
T06
Test Pressure: 10 MPa (100 kgf/cm
2
)
*15
T07
Test Pressure: 50 MPa (500 kgf/cm
2
)
*16
T08
Test Pressure: 70 MPa (10150 psi)
*23
T15
High pressure-proof
structure
*26
Maximum working pressure: 70MPa.
HG

Table of Contents

Related product manuals