YOKOGAWA ROTAMETER RAMC User Manual

4. INTRODUCTION
1-1
All Rights Reserved. Copyright © 2006, Rota Yokogawa
IM 01R01B02-01E-E 5th edition October 01, 2020 -00
1. Introduction
1.1 Target group
The following persons are the target group of this manual:
• Technicians
• Engineers
This manual along with its applicable documents enable the target group to complete the following steps:
• Installation
• Commissioning
• Conguration (parametrization)
• Integration of the ow meter into a process control system
• Troubleshooting
• Maintenance and repair
1.2 Applicable documents
The following documents supplement this manual:
• User´s Manual (IM) IM01R01B02-00-E
• General Specications (GS) GS01R01B02-00E-E
1.3 General items
This manual is additional to IM01R01B02-00-E.
For safety instructions and warranty please see chapter 1 of IM01R01B02-00-E.
This manual contains a description of the RAMC Metal Rotameter with PROFIBUS PA Communication
Type. PROFIBUS PA communication type is similar to the HART communication type in terms of basic
performance and operation.
This manual describes only those topics that are required for operation of the PROFIBUS PA
communication type and that are not contained in IM01R01B02-00-E.
Before use, read this manual thoroughly and familiarize yourself fully with the features, operations and
handling of Rotameter RAMC to have the instrument deliver its full capabilities and to ensure its efficient
and correct use.

YOKOGAWA ROTAMETER RAMC Specifications

General

Brand	YOKOGAWA
Model	ROTAMETER RAMC
Category	Measuring Instruments
Language	English