York SUNLINE PLUS D1EE036 User Manual

036-21411-002-A-0204
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
TECHNICAL GUIDE
SUNLINE PLUS™
AIR-COOLED
AIR CONDITIONERS
D1EG/D1EE036, 048, & 060
3, 4, AND 5 NOMINAL TONS
11 - 11.5 SEER
®
FLEXIBLE EASY TO INSTALL SINGLE
PACKAGE UNITS.
GENERAL
YORK Model DEE/DEG units are single package air condi-
tioners designed for outdoor installation on a rooftop or a
slab. These units can be equipped with field installed elec-
tric heaters for cooling/heating applications or factory
installed gas heat. The units are completely assembled on
rigid, permanently attached base rails. All piping, refriger-
ant charge, and electrical wiring is factory installed and
tested. The units require only electric power and duct con-
nections at the point of installation.
FEATURING
• COMMON FOOTPRINT / COMMON CABINET
• HIGH EFFICIENCY
• CONVERTIBLE AIRFLOW DESIGN
• OPTIONAL MOTORIZED AIR DAMPER
• OPTIONAL MANUAL OUTDOOR DAMPER
• FLEXIBLE INDOOR AIRFLOWS
• FULL PERIMETER BASE RAILS
• INSTALLER FRIENDLY CONTROL CIRCUIT
• EASY UTILITY CONNECTIONS
• 1” OR 2” FILTERS WITH NO MODIFICATIONS
•DIRECT DRIVE
• OPTIONAL BELT DRIVE
• 1 YEAR LIMITED WARRANTY
• COMPRESSORS 5 YEAR WARRANTY
• 10 YEAR LIMITED WARRANTY ON GAS-FIRED
HEAT EXCHANGERS

York SUNLINE PLUS D1EE036 Specifications

General

Cooling Capacity	36000 BTU/h
Power Consumption (Heating)	3200 W
Refrigerant	R410A
Tonnage	3 Ton
Power Supply	220-240V, 50Hz

Summary

YORK Sunline Plus Air Conditioner Introduction

General Unit Overview

Provides an overview of the YORK Model DEE/DEG single package air conditioners, their design and installation.

Key Features and Benefits

Highlights the main advantages and design elements like common footprint, high efficiency, and airflow design.

Unit Details and Options

Detailed Unit Description

Explains the unit's construction, insulation, base rails, and accessibility for servicing.

Available Options and Accessories

Covers factory-installed and field-installed options like economizers, dampers, and electric heaters.

Performance Ratings and Technical Data

Capacity Ratings

Provides cooling, electric heat, and gas heat capacity data, including SEER, EER, and AFUE.

Supply Air Blower Performance

Details supply air blower performance (CFM, RPM, WATTS) across various external static pressures.

Electrical Data and Requirements

Lists electrical data for cooling/electric heat and belt-drive units, including circuit sizes and ampacity.

Installation and Mechanical Specifications

Control Wiring Diagrams

Illustrates single phase, three phase, cooling only, and cooling/heating wiring configurations.

Unit Dimensions and Clearances

Shows front, rear, and side dimensions, utility entry data, and installation clearances.

Mechanical Specifications

Details fan assemblies, refrigerant components, gas heating, and electric heating sections.