YSI ProDIGITAL - System Menu

13
Operation
2.5
System Menu
Push the System ( ) key to view and adjust instrument settings. Highlight a sub-menu then push the
ENTER
key to view
the sub-menu options (Figure 10).
Pre-defined or user-selected options are noted within brackets ( [ ] ).
Figure 10 System menu
Figure 11 Date/Time
Date/Time
→ Date/Time
For accurate logging and calibration data, correctly set the date and time
options (Figure 11). Select any of the following options to set the Date/
Time.
Date/Time options:
• Set YY/MM/DD, MM/DD/YY, DD/MM/YY or YY/DD/MM date format
• Set the correct date
• Select 12 or 24 hour time format
• Set the correct time
1
5
9
3
7
11
13
2
6
10
4
8
12
1 Set the Date and Time
2 Change the user-defined Calibration Options
3 Change the instrument Language settings
4 Change the Radix Point
5 Change the Logging options
6 Change the Sampling options
7 Set the handheld Auto-Shutoff time
8 Set the Backlight mode
9 View the Software Version
10 View the handheld Serial Number
11 View and adjust the Unit ID
12 View the Sensor specific information
13 Adjust the display Brightness