26
Operation
2.8
Files Menu
View Data Filter
→ View Data
Enter the desired filter criteria, then select Show Data or Graph Data
to view the tabular or graphical data. If necessary, use the arrow keys to
scroll through the data (Figure 38 and Figure 39).
Site: View data from one site or all sites.
Data ID: View data from one ID or all IDs.
Begin/End: View data within specific date and time ranges.
Data Memory: (free) % shows the remaining memory available.
Download or delete data to free available internal memory.
The Site List and/or Data ID List can be seen by selecting Site [ ] or Data
ID [ ]. To enable the use of Site and/or Data ID when logging data, select
Logging under the System menu.
Figure 37 Files menu
Figure 38 View Data Filter
Figure 39 View Filtered Log Data
Push the File ( ) key to access the Files menu (Figure 37). Highlight a sub-menu then push the
ENTER
key to view
sub-menu options.
Use the Files menu to view, delete or backup logged data or the calibration file. Data can be filtered by a specific date
and time range and by user-created Site and Data ID lists.
To Next Page
Loading...
