10
Operation
Figure 7 Keypad description
1 System: Opens the system menu. Use to adjust
system settings.
7 Left arrow key: Navigate left in an alpha/numeric
entry screen. Push to return to previous menu in all
screens except alpha/numeric entry. On the Run
screen, push to show graphical representations of the
displayed measurements.
2 Probe: Opens the sensor menu. Use to setup sensors,
change the units shown, select the sensor averaging
mode, and turn on/off Auto Stable and GPS.
8 Right arrow key: Navigate right in an alpha/
numeric entry screen. On the Run screen, push to
show graphical representations of the displayed
measurements. In the View Data screen, push to view
additional parameters in the data set.
3 Calibrate: Opens the calibration menu. Use to
calibrate sensors or restore default calibration.
9 Help: Shows context sensitive help.
4 File: Opens the file menu. Use to view logged data
and calibration files, backup data to a USB stick, and
delete data.
10 ON/OFF: Turn on or turn off the instrument.
5 Exit/Escape key: Exits to the Run screen. When in an
alpha/numeric entry screen, returns to previous menu.
11 Up/Down arrow keys: Scroll through menus or enter
numbers and letters.
6 Backlight: Turns the keypad backlight on or off for use
in low light conditions.
12 Enter key: Push to confirm selections. On the Run
screen, push to log a single data point or start
continuous data logging.
2.1
Keypad and Navigation
1
5 6
7
8
9 10
11 12
2 3 4
2. Operation
To Next Page
Loading...
