Yueming MF20 - User Manual

I
Product Manual
Laser Marking Machine
Applicable model: MF20

Summary

Copyright Statement

Disclaimer and Responsibility Statement

Foreword

Safety Precautions

Chapter 1 Equipment Overview

Description of equipment model

Explains how to interpret the equipment model designation, breaking down its components.

1.1 Equipment Composition

1.1.1 Overall Components

Details the main external parts of the laser marking machine, including diagrams.

1.1.2 Mechanical Components

1.1.3 Optical Components

1.1.4 Electrical Components

1.2 Equipment Parameters

1.3 Product Configuration

1.4 Operating Environment

1.5 Suitable Materials

Lists common materials that can be processed by the laser marking machine.

1.6 Application

Describes the industries and applications where the machine is used, highlighting its benefits.

Chapter 2 Safety Rules

2.1 Warning and signs

Explains warning symbols and their meanings for user safety and hazard identification.

2.2 Product safety

Outlines conditions required for safe operation and handling of the product.

2.3 Safe equipment

Discusses safety equipment and procedures for handling equipment failures and repairs.

2.4 Safety awareness

2.5 Requirements for personnel

Defines roles and training requirements for users, owners, and maintenance personnel.

2.5.1 Definition of terms

Provides definitions for key personnel roles like Owner, Operator, and Maintenance Personnel.

2.5.2 Qualifications

2.5.3 Responsibility

Emphasizes clarifying and carrying out responsibilities for operation and maintenance.

2.5.4 Personal protective devices

Lists required personal protective equipment for operator and maintenance personnel.

2.6 Special product risks

Introduces potential risks associated with the laser marking machine's operation, such as radiation and voltage.

2.6.1 Laser radiation risk

Details the risks and classification of laser radiation exposure and necessary precautions.

2.6.1.1 Common mode

2.6.1.2 Direct laser

Provides warnings regarding direct laser beam exposure and modifications to the light path.

2.6.1.3 Reflection and diffuse radiation

Advises on avoiding risks from laser reflection and diffuse radiation, and proper eyewear.

2.6.2 High voltage risk

2.6.3 Risk of electric shock

Details risks of electric shock and requirements for qualified personnel during operation or repair.

2.6.4 Risk of process by product

2.6.5 Risk of optical system

2.6.5.1 Routine operation

Covers routine operation risks and maintenance of the optical system's components, like lenses.

2.6.5.2 Warning for fire accident

2.6.6 Other risks

Highlights other risks such as unauthorized modification, software changes, and system integration.

2.6.7 Measures for emergency

Outlines emergency procedures for personal injury and fire accidents, including immediate actions.

Chapter 3 Equipment Installation and Commissioning

3.1 Equipment Installation

Details the steps involved in the physical installation of the laser marking machine.

3.1.1.1 Unpacking Steps

Provides a step-by-step guide for safely unpacking the machine and its components.

3.1.1.2 Unpacking

3.1.1.3 Preparation

3.1.2 Installation Steps

Details the sequential steps for assembling and installing the laser marking machine components.

3.1.2.1 Installing Fiber Laser Marking Cavity

Describes how to install the fiber laser marking cavity onto the machine's base.

3.1.2.2 Installing Computer, Keyboard & Mouse

3.1.2.3 Installing Scanning Focus Lens

Details the careful procedure for installing the scanning focus lens to avoid damage.

3.1.2.4 Connecting Galvanometer Cable

3.1.2.5 Installing Footswitch

Describes the placement and connection of the footswitch for triggering the marking process.

3.1.2.6 Installing Sensor and Encoder (marking on the fly optional)

Guides on installing sensors and encoders for optional marking on the fly functionality.

3.1.2.7 Equipment Grounding

Details the strict requirements for safe grounding of the laser equipment's power system.

3.2 Buttons and Indicators Description

Emergency stop button

Explains the function of the emergency stop button for immediate machine shutdown.

Key switch (main power)

Details the operation of the key switch for powering the main circuits of the machine.

Self-locking illuminated button (galvanometer)

Self-locking illuminated button (laser)

Describes the function of the button for powering the laser and its indicator.

3.2.1 Installing Other Accessories

Covers the installation of optional accessories that may come with certain machine models.

3.3 Equipment Debugging

3.3.1 Switch sequence

Details the correct sequence for switching the machine on and off to prevent damage.

3.3.2 Galvanometer Marking Test

Explains how to perform a test on the galvanometer scanning function using marking software.

3.3.3 Laser Test

Describes the procedure for testing the laser's functionality, energy, and frequency settings.

3.3.4 IO Test

Guides on testing Input/Output ports, including footswitch and emergency stop functionality.

3.3.5 Sensor and Encoder Test (optional)

Chapter 4 System Maintenance

4.1 Mechanical Maintenance

Explains the mechanical design concept and actions for mechanical failures.

4.2 Electrical Maintenance

Details the routine checks and maintenance for electrical components, wiring, and indicators.

4.3 Maintenance of Optical Path and Optical Devices

Covers the maintenance of optical components like lenses and reflectors, including cleaning.

4.4 Auxiliary Machine Maintenance

Chapter 5 Troubleshooting

Appendix 1 Electrical Control System Block Diagram of Main Power

Yueming MF20 Specifications