Yueming MF20 - Chapter 2 Safety Rules; 2.1 Warning and signs; 2.2 Product safety; 2.3 Safe equipment

11
Safety Rules Chapter 2
This chapter mainly introduces safety warnings for protecting personnel and the machine,
and makes an introduction to signs used in the owner’s manual. The machine is already equipped
with sufficient safety guarantee, yet it is still with certain risk. All the operators are required to
carefully read through and well understand the safety rules.
2.1 Warning and signs
2.2 Product safety
The following conditions are required to be satisfied to ensure safe work:
 Abide by operation manual and instruction signs;
 Operators and maintenance personnel have received training held by machine
manufacture;
 In case of operation by couples of person at the same time, division of responsibility
should be made and followed;
 No admission to the working area for the unauthorized personnel;
 Avoid any working method breaking the safety rules;
 Timely eliminate all the failures possibly causing lower safety coefficient;
 Abide by maintenance regulations of the machine.
2.3 Safe equipment
Safety equipments are used for protecting personnel, and unauthorized disassembly,
bridge-group or by-pass connection are strictly prohibited; in case of failure with the safety
machine, professional are required for repair. If part replacement is needed, the product with
same model, specification and from the same manufacture is required; otherwise, written
consent from the manufacturer is required.
Warning
May possibly cause serious harm to human body or danger to life and property
Note
What the operator and maintenance personnel should pay attention to