6 REGULAR MAINTENANCE AT SET INTERVALS
Check the pedal microswitch: use a tester to check for the absence of resistance on the
contact by measuring the voltage drop at the terminals, also check that the switch clicks
clearly; ............................................................................................... EVERY 3 MONTHS
Check the power cables to the battery and to the motor, both cables and the sheathing
must be in good condition; ................................................................ EVERY 3 MONTHS
Check the efficiency of the pedal springs; ......................................... EVERY 3 MONTHS
All work must be carried out by qualified staff and original spare parts only should be
used.
Follow the assembly diagrams carefully when installing the machine, any modifications
must be agreed to with the supplier. The supplier declines all responsibility for problems
caused by failure to comply to the proposed solutions.
Any cause for concern that is visible or apparent to the average technician when
carrying out the regular check-ups on the equipment, and that could result in damage or
faults to the equipment itself, must be reported to ZAPI technicians or to the technical
sales network who are responsible for any decisions concerning the safety of the
electric vehicle.
THE USER IS PROHIBITED FROM USING THE VEHICLE SHOULD THERE BE ANY
FAULTS IN THE ELECTRICAL EQUIPMENT THAT REPRESENT A HAZARD.
To Next Page
Loading...
