Page 18
3.5 "SET MODEL" MENU
Model Type
Option #1 The 4Q is configured as a transpallet.
Option #2 The 4Q is configured as a floor washer.
3.6 "SET OPTION" MENU
3.6.a Pallet truck
Hour counter
Running The hour counter is active during running only.
Key on The hour counter is active at all times.
Battery check
Off Battery alarm disengaged.
On Low battery alarm engaged (plus current limiting device).
Aux output #1 (NEV2 - NEB output)
Free Unused output
Brake Output used to control an electric brake that receives the
positive from the tiller switch (with relative diagnosis).
Option #2 Output used to control an electric brake that does not
receive the positive from the tiller switch (diagnosis
disengaged).
Option #3 Output used to enable the electric brake during release
braking. The brake is controlled as in the option "brake".
Quick inversion
Belly Quick inversion active while the belly button remains
pressed.
Timed Timed quick inversion (fixed duration).
Backing function
This option is effective only if the “Set input #2” is set to “Option #1”
Off The backing function is disengaged; the RV2 input is a
speed reduction.
On The backing function is enabled; the RV2 input is used to
activate the backing function, the direction is chosen
using the gears.
To Next Page
Loading...
