ZAPTEC Pro - Technical Specifications; Electrical Specifications; Connectivity Specifications; Integrated Energy Meter

7
English
Mechanical and installation
Parameter Test condition Min Typ Max Unit
Dimensions H: 392 W: 258
D: 112
mm
Weight Including backplate 5 kg
Altitude 2000 m
Input cable cross section 2.5 10 mm²
Input cable diameter 13 18.5 mm
Degree of protection IP54
Noise emission With fan running 47.5 dBa
Charging mode Mode 3, case B
Mechanical strength IK10
Pollution degree Installation
environment
4
Support for ventilation According to EN
61851-1 6.3.2.2
No
Access According to EN
61851-1 5.4
Restricted and non-restricted access
3. Technical Specifications
General
Parameter Test condition Min Typ Max Unit
Rated voltage (Un)
Phase-Neutral 207 230 253 V
Phase-Phase 360 400 440
Rated current (In) 32 A
Rated frequency 50 Hz
Standby power consumption 3 W
Ambient operating temperature -30 40 °C
Maximum charging power
TN 3 phase @ 32 A 22
kW
TN 1 phase @ 32 A 7.4
IT 3 phase @ 32 A
(Norway only)
12.7
IT 1 phase @ 32 A
(Norway only)
7.4
Protection class I
Overvoltage category III