Zebra 105SL User Guide Addendum

Introduction
Installation Types
18
P1004197-001 Addendum to the SEH PS105-Z & PS102-Z User Guide 09/03/2008
for Zebra Printers
Installation Types
SEH IPv6 PS can be factory- or field-installed, as follows:
Factory Factory installations are for new Zebra printers that are built with the internal SEH
IPv6 PS (PS102-Z) option.
Field Field installations are for Zebra printers already in the field that do not have the SEH
IPv6 PS device installed. The SEH IPv6 PS option can be installed on existing printers, as
follows:
• External SEH IPv6 PS (PS105-Z) — attaches to the printer parallel port
•
Internal SEH IPv6 PS (PS102-Z) — for the appropriate Zebra printers, this option
connects directly to the main logic board
Caution • A qualified service technician must perform this installation.

Zebra 105SL Specifications

General

Print technology	Direct thermal
Display	LCD
Product color	Gray
Network ready	Yes
Dimensions (WxDxH)	283 x 495 x 394 mm
Standard interfaces	Parallel, Serial
Internal memory	6 MB
Maximum label width	115 mm
Maximum label length	0.991 m
Power requirements	90-264 VAC, 48-63 Hz

Weight and Dimensions

Depth	495 mm
Width	283 mm
Height	394 mm
Weight	29000 g