Zebra 105SL User Guide Addendum

Preface
Who Should Use This Document
8
P1004197-001 Addendum to the SEH PS105-Z & PS102-Z User Guide 09/03/2008
for Zebra Printers
Who Should Use This Document
This Addendum is intended to be used by any person who will install and work with the SEH
IPv6 Print Server (SEH IPv6 PS).
How This Document Is Organized
This Addendum is set up as follows:
Section Description
Introduction This chapter provides a high-level overview of the
SEH IPv6 PS device, minimum requirements,
installation types, and specifications.
Installation This chapter provides information on how to
install the SEH IPv6 PS.
Operations This chapter provides you with information and
procedures for working with the most frequently
used SEH IPv6 PS features.
Configuration This chapter provides you with details for
configuring the SEH IPv6 PS.
Software Tools This chapter provides you with details on the SEH
and ZebraNet Utilities.
Hardware Troubleshooting This section provides you with solutions to known
issues.
Frequently Asked Questions This section provides a group of frequently asked
questions (FAQs) about the SEH IPv6 PS.
Glossary This appendix is a list of terms and associated
definitions.

Zebra 105SL Specifications

General

Print technology	Direct thermal
Display	LCD
Product color	Gray
Network ready	Yes
Dimensions (WxDxH)	283 x 495 x 394 mm
Standard interfaces	Parallel, Serial
Internal memory	6 MB
Maximum label width	115 mm
Maximum label length	0.991 m
Power requirements	90-264 VAC, 48-63 Hz

Weight and Dimensions

Depth	495 mm
Width	283 mm
Height	394 mm
Weight	29000 g