Zebra 105SL User Guide Addendum

43
Configuration
Set-Get-Do (SGD) Commands (getvar only)
09/03/2008 Addendum to the SEH PS105-Z & PS102-Z User Guide P1004197-001
for Zebra Printers
Setting Alerts Using ZPL Command ^SX
It is important to understand the relationship between the SEH IPv6 PS and the printer when
you are establishing alerts. When the printer transmits an alert on the parallel port, the SEH
IPv6 PS will intercept the data and transmit it viat the TCP/IP port.
In order to receive unsolicited alerts via TCP/IP, you must configure the alert to be transmitted
on the parallel port by setting the second parameter of the ^SX command to 'B'. For more
details on the ^SX command, see the ZPL II
®
Programming Guide For x.14 Firmware and
Above.
Set-Get-Do (SGD) Commands (getvar only)
SGD commands can be used to query the printer for print server configuration information.
For more specific details about SGD commands, see ZPL II
®
Programming Guide For x.14
Firmware and Above.

Zebra 105SL Specifications

General

Print technology	Direct thermal
Display	LCD
Product color	Gray
Network ready	Yes
Dimensions (WxDxH)	283 x 495 x 394 mm
Standard interfaces	Parallel, Serial
Internal memory	6 MB
Maximum label width	115 mm
Maximum label length	0.991 m
Power requirements	90-264 VAC, 48-63 Hz

Weight and Dimensions

Depth	495 mm
Width	283 mm
Height	394 mm
Weight	29000 g