Accessories
116
Removing the USB and Charging Cable
To remove the USB and Charging cable:
1. Press the release level toward the cable.
2. Rotate the adapter toward the front of the device and remove.
Battery Charging
To charge the WT6000, attached the power cable to the Power Connection on the USB and Charging Cable.
Main Battery Charging
The WT6000 Charging/Scan LED indicates the status of the battery charging in the device. See Table 3 on page
17. The standard 3,350 mAh battery fully charges in less than four hours at room temperature. The extended 5,000
mAh battery fully charges in approximately five hours and 30 minutes at room temperature.
Charging Temperature
Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). The battery charger always performs battery
charging in a safe and intelligent manner. At higher temperatures (e.g. approximately +37°C (+98°F)) the battery
charger may for small periods of time alternately enable and disable battery charging to keep the battery at
acceptable temperatures. The battery charger indicates when charging is disabled due to abnormal temperatures
via its LED.