Zebra WT6000 User Manual

Maintenance and Troubleshooting
135
A message appears
stating that the WT6000
memory is full.
Too many files stored
on the WT6000.
Delete unused memos and records. You can save these
records on the host computer.
Too many
applications installed
on the WT6000.
If you have installed additional applications on the WT6000,
remove them to recover memory.
The WT6000 does not
accept scan input.
Unreadable bar code. Ensure the symbol is not defaced.
Distance between
scanner exit window
and bar code is
incorrect.
Move the WT6000 closer or further from the bar code to the
proper scanning range.
WT6000 is not
programmed for the
bar code.
Verify that the WT6000 can read the type of bar code being
scanned (See Technical Specifications). Ensure that the bar
code parameters are set properly for the bar code being
scanned.
WT6000 is not
programmed to
generate a beep.
Verify that a beep on a good decode is used.
During USB data
communications, no
data was transmitted, or
transmitted data was
incomplete.
Incorrect cable
connection.
See Accessories.
Communications
software is not
installed or
configured properly.
Perform setup as described in Accessories
.
Table 15 Troubleshooting the WT6000 (Continued)
Problem Cause Solution

Zebra WT6000 Specifications

General

Display diagonal	3.2 \
Display brightness	400 cd/m²
Display resolution	800 x 480 pixels
Gorilla Glass version	Gorilla Glass 3
Display number of colors	16.78 million colors
Flash memory	8 GB
Internal memory	2 GB
Internal memory type	-
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-30 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Number of cores	4
Processor frequency	1 GHz
Battery capacity	3350 mAh
GPS (satellite)	No
Operating system installed	Android
Product color	Black
International Protection (IP) code	IP65
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Bluetooth version	4.1
Operating frequency	2412 - 2472, 5180 - 5835 MHz
Security algorithms	EAP-FAST, EAP-TLS, EAP-TTLS, LEAP, MSCHAPv2, WEP, WPA-TKIP, WPA2-AES, WPA2-TKIP
Harmonized System (HS) code	84713000

Weight and Dimensions

Depth	34 mm
Width	121 mm
Height	89 mm
Weight	245 g