EasyManuals Logo

Zebra WT6000 User Manual

Zebra WT6000
141 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #69 background imageLoading...
Page #69 background image
Applications
69
Time until empty - Indicates the amount of time before the battery is depleted based on current usage.
Displays when the device is not on AC power.
Time until full - Indicates the amount of time until the battery is fully charged based on charge rate.
Displays when the device is on AC power.
Time since charging - Indicates the amount of time since the battery started charging.
Battery status
Not charging - Indicates that the device is not connected to AC power.
Charging over AC - Indicates that the device is connected to AC power and charging.
Charging over USB - Indicates that the device is connected to a host computer with a USB cable and
charging.
Discharging - Indicates that the battery is discharging.
Full - Indicates that the battery is fully charged.
Unknown - Indicates that the battery status is unknown.
Battery health - Indicates the health of the battery. If a critical error occurs, appears. Touch to view
error description.
Decommission - The battery is past it’s useful life and should be replaced. See system administrator.
Good - The battery is good.
Charge error - An error occurred while charging. See system administrator.
Over Current - An over-current condition occurred. See system administrator.
Dead - The battery has no charge. Replace the battery.
Over Voltage - An over-voltage condition occurred. See system administrator.
Below Temperature - The battery temperature is below the operating temperature. See system
administrator.
Failure Detected - A failure has been detected in the battery. See system administrator.
Unknown - See system administrator.
Wear level - Indicates the health of the battery in graphical form. When the wear level exceeds 80%, the
bar color changes to red.

Table of Contents

Other manuals for Zebra WT6000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zebra WT6000 and is the answer not in the manual?

Zebra WT6000 Specifications

General IconGeneral
Display diagonal3.2 \
Display brightness400 cd/m²
Display resolution800 x 480 pixels
Gorilla Glass versionGorilla Glass 3
Display number of colors16.78 million colors
Flash memory8 GB
Internal memory2 GB
Internal memory type-
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)-30 - 50 °C
Operating relative humidity (H-H)5 - 95 %
Number of cores4
Processor frequency1 GHz
Battery capacity3350 mAh
GPS (satellite)No
Operating system installedAndroid
Product colorBlack
International Protection (IP) codeIP65
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Bluetooth version4.1
Operating frequency2412 - 2472, 5180 - 5835 MHz
Security algorithmsEAP-FAST, EAP-TLS, EAP-TTLS, LEAP, MSCHAPv2, WEP, WPA-TKIP, WPA2-AES, WPA2-TKIP
Harmonized System (HS) code84713000
Weight and Dimensions IconWeight and Dimensions
Depth34 mm
Width121 mm
Height89 mm
Weight245 g

Related product manuals